solution
Explain Refer to Table S6.1 – Factors for Computing Control Chart Limits (3 sigma)
LOADING…
for this problem.
Twelve? samples, each containing five? parts, were taken from a process that produces steel rods at Emmanual? Kodzi’s factory. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results? were:
|
Sample |
Sample Mean? (in.) |
Range? (in.) |
Sample |
Sample Mean? (in.) |
Range? (in.) |
|
1 |
9.502 |
0.033 |
7 |
9.501 |
0.041 |
|
2 |
9.502 |
0.041 |
8 |
9.505 |
0.034 |
|
3 |
9.491 |
0.034 |
9 |
9.495 |
0.027 |
|
4 |
9.504 |
0.051 |
10 |
9.501 |
0.029 |
|
5 |
9.495 |
0.031 |
11 |
9.501 |
0.039 |
|
6 |
9.501 |
0.036 |
12 |
9.504 |
0.047 |
For the given? data, the
x
?=
enter your response here
inches ?(round your response to four decimal? places).Based on the sampling? done,
the
control limits for ?3-sigma
x
chart? are:Upper Control Limit
?(UCLx?)
?=
enter your response here
inches ?(round your response to four decimal? places).Lower Control Limit
?(LCLx?)
?=
enter your response here
inches ?(round your response to four decimal? places).Based on the
x?-chart,
is one or more samples beyond the control? limits?
?
.For the given? data, the
R
?=
enter your response here
inches ?(round your response to four decimal? places).The control limits for the
?3-sigma
? R-chart are:Upper Control Limit
?(UCLR?)
?=
enter your response here
inches ?(round your response to four decimal? places).Lower Control Limit
?(LCLR?)
?=
enter your response here
inches ?(round your response to four decimal? places).Based on the? R-chart, is one or more samples beyond the control? limits?
?
Yes
No
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

