solution

/in /by
reentrant-flow” version of the Littlefield game “testing”. station 3 tuning” the data here can be different from your game. Consider a CONWIP flow line with 3 stations in series ( 13 ? 3); each station consists of one machine and every unit has to flow through all three stations before it is completed. The unit processing times at the three stations are 4.8 hours, 2.1 hours, and 3.6 hours, respectively. (Aside: how would you estimate average processing time at station 1 for your Littlefield game?) There are 24 working hours in a day, and 5 working days per week. Currently there is a single machine at each station and the current demand is 3 units per day. Demand is expected to grow in the future and then stabilize; peak demand is estimated to be 11 units per day. Answer the following questions using the data specified d. (*14 points) By definition, station implied utilization – demand rate/station capacity, where station capacity is measured in terms of its production rate. Clearly as demand rate increases, implied utilization increases and can exceed 100% for high enough demand rate. In such cases when implied utilization exceeds 100%, we have insufficient station capacity and one way to rectify this is to increase station capacity by adding machines to a station. Suppose your goal is to keep implied utilization under 100% at all stations! Answer the following two questions: (1) How many machines will be needed at stations 1, 2 and 3. to meet the peak demand? (i) If WIP is managed so that it averages w= 10 units (this is the CONWIP level), compute the practical worst case cycle time for the line under peak demand, with your chosen of number of machines at stations 1. 2. and 3.
 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

/in /by
(ii) Based on the available information on the flow line, would you expect the actual line’s throughput under peak demand, as in part d, to be smaller or larger than your Practical Worst Case estimate? (Clearly explain your reasoning – this question is asking you to examine if the assumptions behind the PWC calculations are satisfied by the line or not and if not what the impact of assumption violation will be.) reentrant-flow” version of the Li game “testing”, station 3 tuning”: the data here can be different from your game. Consider a CONWIP flow line with 3 stations in series (? 2 3); each station consists of one machine and every unit has to flow through all three stations before it is completed. The unit processing times at the three stations are 4.8 hours, 2.1 hours, and 3.6 hours, respectively. (Aside: how would you estimate average processing time at station 1 for your Littlefield game?) There are 24 working hours in a day, and 5 working days per week. Currently there is a single machine at cach station and the current demand is 3 units per day. Demand is expected to grow in the future and then stabilize; peak demand is estimated to be 11 units per day. Answer the following questions using the data
 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

/in /by
How would you understand positioning your product/service? what would you need to understand? Select one:

a. place, rank, customer, and product
b. outcomes, attitude, rank, customer
c. place, rank, attitude, outcomes
d. both a and b
e, none of the above
What are the factors that is influencing consumer decisions? Select one:
a. Situational factors, personal factors
b. need recognition factors, and purchase decision factors
c. none of these are factors
d. Psychological factors, and social factors
e both A and D
What is sales? Select one:
a. the process of showing goods and services
b. the process of getting goods and services
c. the process of actually selling products and/or services
d. the process of creating goods and services
e. none of the above
The target market should include only those segments of a market that are both a Select one:
a. profitable to serve, likely to be receptive to the products a company provides
b. customer focus, profitable to serve
c. products a company can provide and perception of high profit
d. both and b
e, none of the above
Marketing Research is a… Select one:
a. process to sell products
b. a process to sell services
C. Uses customer insights that come out of collecting and analyzing marketing information
d. a process that identifies marketing opportunities and solve marketing problems
e both C and D

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

/in /by

If you want to answer this question, DON’T COPY and PASTE any of these answers

https://www.chegg.com/homework-help/questions-and-answers/manufacturing-company-uses-40-40-pallet-without-overhang-transporting-unit-loads-product-m-q86996279

https://www.chegg.com/homework-help/questions-and-answers/manufacturing-company-uses-40-40-pallet-without-overhang-transporting-unit-loads-product-m-q60225656

They’re wrong

I will not upvote if you did, instead I will dislike and report it as I did previously.

A manufacturing company uses a 40″ by 40″ pallet without any overhang, for transporting their unit loads. The product is manufactured on many machines and each product is packaged into a unit ( carton ) that is 8″x8″x5″ in dimensions. The units rests on the 8″x8″ side on the surface of the pallet and on the layers; all units must rest on the 8″x8″ side with reference to the surface of the pallet and layers, and all layers on each pallet must be identical. Each palletized unit load comprising the units, must be identical. The number of layers of units on a pallet must be such that the total height of the layers on a pallet from the surface of the pallet must be less than or equal to 50 inches. The height of each pallet is 6 inches. The company will ship 756,000 units per week in the form of palletized unit loads to the distribution centers. Tractor-trailers (semitrailers) having storage space of 240 inches in length x 120 inches in width x 170 inches (permissible in certain States) in height are being used to transport the palletized unit loads to the distribution centers on weekly one way trips . Palletized unit loads are stacked inside each trailer so as to maximize the number of units stored within each tractor-trailer. At the end of the month, a number of tractor-trailers are sent to collect all pallets (without any unit loads on them) from the distribution centers and bring them back to the manufacturing company. The palletized unit loads, or pallets without unit loads on them, can be stored inside the trailers with clearances from the walls and ceiling equivalent to 1% of the volume of the storage space of each tractor-trailer.

Answer the following questions:

1. The palletized unit load will have _________________ units per layer and __________ units per pallet.

2. Each tractor-trailer will hold _______________ pallets and ____________ units on its one way trip to the distribution center during the week.

3. The number of tractor-trailers that will be used per week for the one way trips to the distribution center will be ____________________

4. The number of tractor trailers that will be used to bring back the pallets from the distribution center will be ______________________

5. The trailer return ratio will be _____________________

6. The material handling equipment that is most likely to be used for loading the palletized unit loads on to the tractor-trailers will be ___________________

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"