solution

  • In terms of power and influence (e.g. dependency relationships, bases of power, influence tactics), what do you think would be the most effective or most important for driving change?

CASE STUDY : JUST WASH YOUR HANDS

In early 2011, Sarah Noble, a fourth-year science student at Western University Canada in London,

Ontario, was reviewing her recommendations to improve the hand-cleaning compliance of the London

Health Science Centre’s (LHSC) medical and support staff. Noble’s research and report was created for

the manager of Infection Prevention and Control and constituted one of her assignments for her cooperative placement. It was well known that cleaning hands was an effective measure to reduce hospital acquired infections. In 2007, LHSC had been part of a pilot project called “Just Clean Your Hands,” and

although hand-washing conformance had been improving since its launch, hand-hygiene compliance rates

were not meeting the targets set by the Province’s Ministry of Health and Long-Term Care.

Changing the culture and behaviour of the staff was turning out to be a tremendous challenge that

required a thorough understanding of organizational behaviour. Noble needed to provide her

recommendations to the hospital administration within the week so that an effective plan of action could

be put in place. She sighed. It was going to be a long week.

Ontario Health Care5 and LHSC

Hospitals in Ontario were publicly funded and accountable to the Province’s Ministry of Health and

Long-Term Care. There were 227 hospitals in the province. The London Health Sciences Centre was a

large regional hospital with an annual budget of approximately $1 billion. It admitted more than 41,000

patients each year. There were several different employee groups working at LHSC, including

physicians, nurses, clerical staff and volunteers. In total, 14,295 people worked at LHSC in various

capacities at one or more of its three campuses: University Hospital, Victoria Hospital and South Street

Hospital. Many of these groups had contact with patients. Although most of these groups were

employees of the hospital, physicians generally were not employees and, instead, charged a fee for their

services to the Ontario Health Insurance Plan6 (see Exhibit 1 for a complete list of employee

classifications at LHSC). Health-care staff came into contact with patients through a range of tasks, from

helping patients become comfortable in bed to taking a patient’s pulse. These activities had the potential

to transfer many thousands of micro-organisms to the hands of a health-care staff member or to a patient.

HANDWASHING7

The Ministry of Health and Long-Term Care had developed a detailed hand-washing training program for

hospital staff throughout the province. The program was called “Just Clean Your Hands.” A person who

would be coming into contact with a patient was required to follow the hand-washing protocols. The list

included physicians, nurses and other health-care professionals, such as physical therapists and dieticians,

housekeeping staff members and the patient’s visitors.

When to Clean Hands8

Health-care experts had determined that there were four situations when hospital staff needed to clean

their hands. Referred to as “the four moments of care,” these moments were:

• Moment 1 — Before initial contact with a patient or with the patient’s environment, including

furniture, clothing, medical devices, telephones and any personal items. This step was to protect the

patient from harmful micro-organisms carried on a staff member’s hands.

• Moment 2 — Before aseptic procedures.9 This step helped prevent germs that were on the health-care

worker or on the patient from entering the patient’s body.

• Moment 3 — After body fluid exposure risk. This step included glove removal and ensured that the

medical staff member was protected against harmful bacteria and viruses.

• Moment 4 — After contact with a patient or with the patient’s environment.

How to Clean Hands

Hand washing to prevent HAI required the use of soap and water or an alcohol-based rub. As well,

fingernails needed to be clipped short because long nails could harbour more micro-organisms, and nail

polish could not be used since it could increase the number of micro-organisms in the nails. Rings,

bracelets and watches could not be worn by staff who came in direct contact with patients.

When using soap, staff members were to wet their hands with warm water, apply liquid soap and

vigorously lather for at least 15 seconds. The soap had to be removed thoroughly by rinsing their hands

well. Their hands needed to be dried with a paper towel and the taps turned off using paper towel to

prevent recontamination of their hands.

If an alcohol-based hand rub was used, the staff member’s hands had to be visibly clean. Hands soiled

with food, dirt, or other contaminants could not be cleaned using alcohol rubs. Instead, staff were to

apply one or two pumps of solution to their hands and then spread the solution over the entire surface of

their hands, rubbing for at least 15 seconds or until their hands were dry.

COMPLIANCE DATA

The Rates

Historically, LHSC had very poor hand-washing compliance rates. However, the rate of compliance had

been improving since the launch of the “Just Clean Your Hands” pilot project in 2007 as the organization

focused on the problem.

In some locations, tremendous improvements had been made. For example, LHSC’s Victoria campus had

moved from 13 per cent in 2008 to 74 per cent in 2010 for Moment 1 compliance. However, across all of

its campuses, LHSC still had between 20 per cent and 30 per cent non-compliance. This data was

particularly troubling, since it was gathered using observers who were trained to follow staff and record

hand-cleaning conformance; consequently, the staff would usually be aware that the observer was present

and could alter their behaviour while being observed. The Ministry of Health and Long-Term Care

required that these rates be published. Exhibit 2 summarizes compliance rates for LHSC. Exhibit 3 lists

compliance rates at selected Ontario health-care organizations. Although LHSC was doing relatively well

compared to other organizations in the province, it wanted to improve compliance towards 100 per cent.

Ineffective hand cleaning (such as not scrubbing long enough) continued to be an issue affecting overall

compliance. The Vancouver Island Health Authority in British Columbia had found that nurses, for

example, attempted to comply with hygiene requirements 50 per cent of the time, but because their hand

washing was not done properly due to the wearing of rings, bracelets and nail polish, actual compliance

was reduced to 33 per cent. Hand-washing compliance also tended to vary by profession. Physicians had

different compliance levels than housekeeping staff, for example. Exhibit 4 provides a summary of handwashing compliance by profession.

Factors Leading to Non-Compliance

There were several reasons for poor hand-hygiene compliance:

1. Workload was one of the primary problems. Compliance of 100 per cent to the four moments could

take a significant amount of time, and hospital staff was often very busy. If staff members were in a

hurry or rushed, proper hand cleaning was sometimes rushed or skipped altogether.

2. Proper conformance to requirements could necessitate hand cleaning many dozens of times each day.

This could cause irritation or dryness to the staff’s hands.

3. The location of sinks or alcohol rub dispensers was inconvenient. To address this, many dispensers

had been installed throughout the sites in patients’ rooms, on stretchers and on wheel chairs.

4. Staff members were generally hesitant to speak up if they observed others not conforming to hand cleaning procedures and often preferred to avoid such confrontations.

5. Some religious beliefs had prevented the use of alcohol-based rubs.

6. Medical practitioners and support staff had established behaviours that were difficult to change. It

was thought that some individuals perceived that the infection risk linked to hand hygiene was not

serious enough to warrant the inconvenience of proper conformance. This attitude was somewhat

analogous to a driver’s use of a cell phone while driving a car. Although drivers were generally

aware that this distracting activity was dangerous to oneself and to others, it was still frequently done;

that is, the driver perceived the risk to be minimal relative to the inconvenience of not using the

device.

7. Visitors were often unaware of proper hand-cleaning procedures or chose to not follow the

procedures.

8. There was no mechanism for the discipline of physicians and other staff for failure to follow hand hygiene procedures. Many members of LHSC’s staff were unionized and, because the physicians

were not employees but contractors, discipline was a difficult issue. The discipline of physicians,

viewed as highly trained professionals and specialists in their fields, for an issue like hand hygiene

had never been a part of this professional group’s culture and would likely be viewed with disdain.

GOING FORWARD

Noble turned on her iPad and started reviewing her analysis to this point. She needed a plan to reinforce

the change in behaviour and culture that had started with the Just Clean Your Hands program and to

overcome the obstacles that she knew reduced hand-hygiene compliance rates. How could the staff be

motivated to continue to do better? There were so many employee groups, each with different

subcultures and compliance issues. What needed to be communicated? Who needed to get the message,

and who needed to deliver it? What sort of leadership style and approach would be most effective?

In terms of data collection, how should the compliance rates be monitored? In the past, LHSC had hired

and trained students to do the hand-hygiene audits. How much, if at all, did their presence change the

results? Noble had read that a hospital in the United States had tested the use of a “compliance checking

chip.” This device, worn by health-care practitioners, collected hand-hygiene data for each wearer and

could be used to coach or discipline employees who did not comply with hand-cleaning procedures. She

wondered about the implications of using such a device at LHSC.

The manager of Infection and Prevention Control had been clear to Noble that LHSC was on a fixed

budget, and any new initiative would need to be cost-effective and well justified. With these thoughts in

mind, she began to work in earnest on her proposal.

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

Develop a strategic marketing plan for a start-up fitness center organization related to Sports and Recreation Management.
The Directions included:I. Executive SummaryAn executive summary is an introduction to your business including a summarized version of your marketing plan. The main objective is to briefly list and describe all major components of the marketing plan. Therefore, you need to make sure that your readers are immediately getting the full picture. This section should be clear, concise and to the point.
Describe the industry trend:In this section, provide more detail about the characteristics of your industry. You may also reference an expert analysis of trends in your industry and how your business is anticipating those changes.
II. Company DescriptionProvide a high-level review of your business that will help readers and potential investors understand your business model.
What is your mission statement?Your mission statement is an expression of your company’s values and represents the reason why you want to start this business.
What goals (short- and long-term goals) do you have for your company?List out your primary goals (short- and long-term goals) for your company, including your future plans. When planning goals, remember to be SMART: specific, measurable, achievable, relevant, and timely. A poor goal is vague, “I want to increase revenue.” A better goal is specific, “I want to increase revenue by 5 percent in a year.”
III. Market Research/ Analysis
Describe your industry:In this section, provide more detail about the characteristics of your industry. You may also reference an expert analysis of trends in your industry and how your business is anticipating those changes.
Who are your target customers?In this section, describe the characteristics and habits of your customers. Describe current customers and prospects for your business and why your product or service will be valuable to them. What is their age range, income level, and other details that create a customer profile for your company?
Who are your competitors?Describe the companies that will directly compete with your company in the marketplace. Include information on their size, products, sales offers, and advertising.
Conduct a SWOT analysisAssess your position in the marketing place using a SWOT analysis to identify your major strengths, weaknesses, opportunities, and threats. What advantages do you have over your competition? Advantages can include your location, employees, target market, or unique product or how your service is presented or delivered.
Conduct your competitor SWOT analysisAssess your major competitor’s position using a SWOT analysis to identify the competitor’s major strengths, weaknesses, opportunities, and threats.
IV. Product/Service LineDescribe in detail what your product or service is and how it will meet the needs of your customers. Explain the benefits of your product or service and the advantages it has over the competition.
What product or service will your business provide?Describe your product or service and make the case for why your product will be successful. How does your product or service fulfill your customer need in a unique way? What does your business sell? What are its advantages?
Describe your pricing structure and strategiesPresent all of the different ways that your company will offer its product or service and the price of each product or service package. Price is a critical component of your marketing mix. The price of your products or services should reflect your overall company strategy. Pricing should be competitive as well as a reflection of the quality, costs and profit margin. And it is important to have a clear understanding of what your competitors are charging. The pricing strategy needs to be in alignment with your positioning strategy. List strategies you plan to use, such as providing a discount on some items you sell in order to increase the sales in other areas.
V. Marketing & SalesDescribe how your company will focus on its customers through its marketing and sales strategies. Then, show how your company will reach its customers and how it will sell its products.
What is your plan to grow your company?In this section, describe your overall strategy for expanding your business and increasing sales. Growth strategies may include your plans for acquiring other businesses, increasing your number of employees or franchising your business.
How will you communicate with your customers?Determine the best way to reach your target audience and explain the benefits of your product or service. Communication tactics may include websites, social media, print and online advertising, strategic partnerships and sponsorships, and printed materials such as brochures, catalogs or flyers. Successful communication strategies include a mix of promotion methods.
How will you sell your product or service?Explain your strategy for selling your product or service by first defining your sales team. This may include determining how many salespeople you will use, if they are internal employees or people outside of your company and what training and compensation they will receive. Also discuss sales activities, such as identifying and prioritizing groups of people that your company has identified as customers.
 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

Please do the work with your group and submit it into the link. Write it
in your own words (3 pages approximately). Single spacing, 12 Pt. time
new Roman font preferred. Also write the names and IDs of all your group
members with your completed work. This work contains some marks.
Write
the names and student numbers of all of your group members
Answer the
following question in your own words by providing examples from your own
point of view.
1. What do you mean by Cultural Diversity? From your own
observation describe the nature of cultural diversity of Canadian
society.
2. What are the strengths and weaknesses of Canadian cultural
diversity? Analyse them in your own words.
3. Do you find any cultural
diversity in your own country? Explain the nature of that cultural
diversity. Do you find any similarities and differences between your
country’s cultural diversity and the Canadian cultural diversity?
Explain them in your own words.

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

Gaspe Agricultural Tannery Ltd. in New Richmond, Quebec supplies leather to Antigonish Boot Manufacturing Ltd. in Nova Scotia on a monthly basis for manufacturing western style cowboy boots. Antigonish Boot Manufacturing does not keep a large stock of leather inventory on hand, thus the Gaspe Agricultural Tannery factory must provide sufficient leather to meet their production demand on a timely basis. Furthermore, the quality of the leather must be of the highest grade. The sales demand for cowboy boots is lowest in the late winter, increases during the summer and fall, and reaches its peak during the Christmas (November) season. The production demand for leather follows the same general pattern. Gaspe Agricultural Tannery Ltd. in New Richmond, Quebec has experienced the following monthly demand for the past fourteen months:

Month

Demand

(1,000 yd2)

Month

Demand

(1,000 yd2)

January

1.3

August

2.0

February

1.1

September

2.9

March

0.9

October

3.2

April

1.6

November

3.7

May

1.5

December

2.4

June

2.1

January

1.6

July

2.4

February

1.0

  1. Develop a forecast for March using: (i) a 3-month moving, and (ii) a 3-month weighted moving average with weights of .60, .30 and .10, for the most recent demand.

b.) Develop an exponentially smoothed forecast with = 0.4.

c.) Develop an adjusted exponentially smoothed forecast with = 0.40 and = 0.50.

d.) Develop a linear trend line forecast.

e.) Compare the accuracy of your moving average, weighted moving average, exponential

smoothing, adjusted exponential smoothing, and linear trend line forecasts using MAD, and

indicate the forecast you would employ.

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"