solution

Refer to able 56.1 – Factors for Computing Control Chart Limits (3 siama for this problem. Twelve samples, each containing five parts, were taken from a process that produces steel rods at Emmanual Kodzi’s factory. The length of each rod in the samples was determined. The results were tabulated and sample means and ranges were computed. The results were: O Sample 1 2 3 4 5 6 Sample Mean Range Sample Sample Mean (in.) Range (in.) (in.) (in.) 8.104 0.044 7 8.101 0.021 8.102 0.051 8 8.103 0.058 8.089 0.042 9 8.095 0.039 8.104 0.037 10 8.101 0.038 8.097 0.048 11 8.101 0.054 8.101 0.053 12 8.104 0.061 = For the given data, the x = inches (round your response to four decimal places). Based on the sampling done, the control limits for 3-sigmax chart are: Upper Control Limit (UCL;) – inches (round your response to four decimal places). Lower Control Limit (LCL;) – inches (round your response to four decimal places). Based on the x-chart, is one or more samples beyond the control limits? For the given data, the R= inches (round your response to four decimal places). The control limits for the 3-sigma R-chart are: Upper Control Limit (UCLR) = inches (round your response to four decimal places). Lower Control Limit (LCLR) = inches (round your response to four decimal places). Based on the R-chart, is one or more samples beyond the control limits? ? Definition Sample Size, n 3 NOCOU WN Mean Factor, Az 1.880 1.023 0.729 0.577 0.483 0.419 0.373 0.337 0.308 0.266 Upper Range, D 3.268 2.574 2.282 2.115 2.004 1.924 1.864 1.816 1.777 1.716 Lower Range, D 0 0 0 0 0 0.076 0.136 0.184 0.223 0.284 9 10 12
 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

In addition to covering liability for bodily injury or property damage home-based business coverage can also cover Select one:

a personal belongings not used for business
b. automobiles used for business and personal use
c slander, libel and copyright infringement
d. personal medical services
Flood insurance is reinsured by: Select one:
a. state government flood insurance programs
b. private flood specialists
c inland marine insurers
d the federal government
The method of handling risk called retention is also known as: Select one:
a liquidity
b. self-insuring
c. long-term care
d preventive care
Coinsurance requires that: Select one:
a both the policyholder and the insurer pay part of each covered expense after the deductible has been met
b both the policyholder and the insurer pay part of the retention limit of the policy
c both the policyholder and a co-signer on the policy pay part of each covered expense up to an amount equal to the dec
d both the policyholder and a co-signer on the policy guarantee to pay one-half of each covered expense after the deduct

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

A parts distributor has an annual demand for machine parts of 10,000 per year with average cost of $10 per unit. There are two options for shipping this from Kuala Lumpur, Malaysia, (1) a combination of ship and train that will take 30 days at a cost of $3 per unit or (2) a combination of ship and truck that will take 20 days at a cost $4 per unit. The holding cost rate is 30% of unit cost per year. show all your formulas work as well

a. Which mode of transportation is more economical? (round to the nearest dollar)

b. Calculate the annual total shipping costs if the parts distributor keeps a safety stock of 100 units for option (1) and a safety stock of 50 units for option (2) (round to the nearest dollar)?

 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

solution

Locating a facility is a decision that any company should make at some point. It is a decision that is made at the organizational level and has a profound effect on different aspects of the company. Many of the operations that are performed within the company depend deeply on the location of its facilities. There are many factors that can determine where an organization will locate its facilities. For any given situation, some factors become more important than others in how facility location affects an organization’s performance. Facility location is categorized as a strategic decision, because it is concerned with the whole environment in which the firm operates and it involves the entire resources and the people who form the company and the interface between the two. Like any other strategic decision, facility location has long term effects on company’s operation Economic changes that occur during a facility’s lifetime can drastically alter the appeal of a particular site, turning today’s optimal location into tomorrow’s investment blunder. Determining the best locations for new facilities is thus an important strategic challenge. This decision can also impact various parts of a company’s supply chain and can have a long-term effect on total logistics costs.

a) Explain any two factors to consider when deciding on the location to build your production plant (AN, 6)

b) Explain the most critical factor to consider when choosing a site to build a bank (AP, 5)
c) Explain any two living conditions to consider when siting a bank (AP, 7)
d) Despite an effective assessment of all potential location and choosing the most efficient one, that site may still turn out to non-economical in the course of time. Discuss any two potential risk factors that can affect the performance of a company sited at the best choice location(AP, 7)
 
"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"